Product Catalog

Clorox®
Total 360® System

Superior Electrostatic Coverage with Trusted Clorox® Products for the Ultimate Disinfecting Solution

2017 ISSA Innovation of the Year Award Winner and Visitors’ Choice Award winner.

 

Get Up to $100 in Rebates
1 2 3
 
 
 

Directions for Use

Preparing the Spray Area

Show/Hide

  1. Clean gross filth by using standard manual cleaning protocols.
  2. Close the room to the general public. Place signs or warning indicators on doors that indicate no one should enter the room.
  3. Power off any sensitive electrical devices but do not unplug them.

Unit Operation/Setup

Show/Hide

  1. Choose the appropriate Clorox-approved product for cleaning, sanitizing or disinfecting.
  2. Mount desired Clorox-approved product on Clorox® Total 360® Electrostatic Sprayer base and strap into place. Ensure that the bottles are positioned with the opening facing up and the opening facing the dispensing tubes.
  3. Unscrew the lid on the Clorox-approved product of your choice and connect the Clorox® Total 360® Electrostatic Sprayer dispensing cap to the bottle. Be sure the cap is screwed all the way down; do not overtighten.
  4. Unwrap electrical cord completely and plug Clorox® Total 360® Electrostatic Sprayer into a grounded, three-pronged socket.
  5. Locate the On/Off switch on the base unit. Push the Total 360 Sprayer to the On position. A blue light will illuminate on both the sprayer instrument panel and unit power switch.
  6. Put on appropriate personal protective equipment.
  7. Remove the sprayer from the unit. A blue power indicator light should be illuminated on the sprayer. The system is now ready for use.
  8. Prime the Clorox® Total 360® Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner. Spray the Clorox® Total 360® Electrostatic Sprayer for about 20 seconds to generate a steady flow of solution.
  9. When spraying, a second blue indicator light will illuminate on the sprayer instrument panel when the trigger is depressed. NOTE: Sprayer will automatically stay on until trigger is depressed again.

Sprayer Operation During Cleaning

Show/Hide

Download Quick Start Guide (PDF)

  1. Position the Clorox® Total 360® Electrostatic Sprayer in a rear corner of the area.
  2. Direct the nozzle at the desired surface.
  3. Begin to spray. Press the sprayer button once to initiate spraying. Press once to stop flow of the sprayer.
  4. Follow a continuous path around the area, working from high to low areas and moving the sprayer in a sweeping motion until surfaces are thoroughly wet. After spraying, keep the area closed per product SDSs.
  5. Open the room once the reentry time has passed.

Changing Clorox-Approved Products

Show/Hide

  1. Stop spraying the Clorox® Total 360® Electrostatic Sprayer.
  2. Disconnect the bottle connection from the Clorox-approved product that is to be changed, and remove it from the sprayer. Cap the removed product if it is being stored.
  3. Purge the Clorox® Total 360® Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner for about 20 seconds.
  4. Choose the appropriate Clorox-approved product for cleaning, sanitizing or disinfecting.
  5. Mount the product on the sprayer’s base and strap it into place. Ensure that bottle opening faces up and toward the dispensing tubes.
  6. Unscrew the product lid and connect the Clorox® Total 360® Electrostatic Sprayer dispensing cap to the bottle. Be sure the cap is screwed all the way down; do not overtighten.
  7. Prime the Clorox® Total 360® Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner. Spray the Clorox® Total 360® Electrostatic Sprayer for about 20 seconds to generate a steady flow of solution.

 

After Use and Storage

Show/Hide

  1. Stop spraying the Clorox® Total 360® Electrostatic Sprayer.
  2. Disconnect the bottle connection from the Clorox-approved product, and remove it from the sprayer. Cap the removed product if it is being stored.
  3. Purge the Clorox® Total 360® Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner. Spray the Clorox® Total 360® Electrostatic Sprayer for about 20 seconds.
  4. Turn off the unit. The blue indicator light on the instrument panel and base of the unit should no longer be illuminated.
  5. Unplug the Clorox® Total 360® Electrostatic Sprayer.
  6. Wrap cord on cord holder on the base unit.
  7. Store in a safe, dry place.

Related Products

Clorox Commercial Solutions®

Clorox®
Disinfecting Wipes

See It
Clorox Commercial Solutions®

Clorox® Urine Remover

See It

Request a Demo

Please fill out the form below and a Clorox Broker will contact you to schedule a demo or answer additional questions.


Sign Up for News

Receive industry insights, toolkits or product sample offers right in your inbox!

Subscribe Today

close